Single Cab Canopy
MRT single cab ute canopies are packed with impressive features that make for an extremely robust and cost effective ute canopy for your new or existing ute or 4WD. The MRT single cab 2400mm x 1800mm x 860mm ute canopy— underwent extensive quality testing to ensure it was completely capable in the harshest working conditions.
2400 x 1800 x 860mm
STARTING AT $3099
2400 x 1900 x 860mm
STARTING AT $3299
110 days interest free finance available on this product
STANDARD CANOPY INCLUSIONS
Length - 2400mm Height - 860mm Width - 1800mm Heavy Duty Aluminium Over 15 options of upgrades
FULL LENGTH PIANO
TYPE HINGE
FULLY SEAM
WELDED
STRONG KEY LOCKABLE
T-lOCKS
IN-BUILT FLOOR
WEATHER PROOF
SEALS
2.5mm ALUMINIUM
CHECKERPLATE
CANOPIES DIMENSIONS
We offer our canopies in two heights: 860mm and 1000mm. For width as standard we have both 1800mm and 1900mm options however we are able to customise this to suit your requirements. For length this standard dual cab canopy comes in 1800mm however we are also able to customise this to suit your requirements. If you would like to build a custom sized canopy you can give our friendly team a call on 1300 650 090.
UPGRADE OPTIONS
BUILD YOUR CANOPY
You can use the form below to customise and build your canopy to suit your exact requirements. If you require a custom dimension change in width or length please contact our team on 1300 650 090.
STANDARD FIXED WINDOWS
Features
- ADR approved glass (not perspex)
- Waterproof
Specifications
- Front and rear window size: 760mm x 350mm
- Side window size: 1250mm x 350mm
MESH PROTECTOR (FOR FIXED WINDOWS)
Features
- Laser cut aluminium
- Powder coat options available for mesh in satin black or gloss white or alternatively if we are powder coating your canopy we can match the colour.
Specifications
- Front and rear window size: 760mm x 350mm
- Side window size: 1250mm x 350mm
SLIDING WINDOWS
Features
- ADR approved Glass (Not Perspex)
- Waterproof
- Insect mesh for sliding section
Specifications
- Front and rear window size: 760mm x 350mm
- Side window size: 1250mm x 350mm
SOLAR VENT
Our solar powered exhaust fans are the ideal solution to reduce the heat build-up in your canopy and make the space comfortable again. They also prevent mould, condensation and odour build-up. Powered entirely by the 2.5w solar panel the vents are water and UV resistant.
FEATURES
UV Resistant
Water resistant
2.5w tempered glass solar panel
Powered entirely by sunlight
JERRY CAN HOLDER
Features
- Heavy Duty 5mm Aluminium
- Available in raw aluminium or powder coat finish
- Suits most standard 20L jerry cans
Specifications
- 380mm x 215mm x 380mm
- Weight: 5.2kg
KEYLESS ENTRY SYSTEM
The MRT innovative keyless entry system allows you to access your heavy-duty MRT ute canopy or toolbox promptly and with ease. Our market leading keyless entry system has been thoroughly trialled and tested for quality control and longevity. Purchase your new MRT ute canopy or toolbox with a fully fitted keyless entry system or upgrade your existing MRT products with our DIY kit.
LENGTH
Our standard range of canopy lengths at MRT include our part-tray canopy at 1200mm, our dual cab canopy at 1800mm, our extra cab canopy at 2100mm and our single cab canopy at 2400mm. We also offer customise lengths on any of our standard canopies.
You can browse through the different standard options we have by selecting the size below or alternatively if you would like to have a canopy built to suit your unique length requirements you can give our friendly team a call on 1300 650 090.
HEIGHT
We offer all of our canopies at MRT in two heights: 860mm and 1000mm. 860mm is our standard option and we find that at this height the canopy will follow the roofline of the vehicle on most makes and models with the exception of landcruisers. The 1000mm height option is ideal for those wanting to maximise the inside space of their canopy, we see this as an extremely popular upgrade for our camper customers. You can browse through the different standard options we have by selecting the size below.
STANDARD LADDER RACKS
Our standard ladder rack range allows you to safely secure your gear to your canopy. We sell our racks individually and we find customers usually purchase them in sets of 2,3 or 4 depending on the size of their canopy and their specific intended use.
X-SERIES LADDER RACKS
Our X-series ladder racks are our premium ladder rack option and are exclusive to MRT. The X-series racks have an anodised aluminium finish. These racks come individually and we find customers usually purchase them in sets of 2,3 or 4 depending on the size of their canopy and their specific intended use. We are able to adjust the height of our X-series ladder racks in 20mm increments.
TIE DOWN POINTS
FOR X-SERIES LADDER RACKS
Our X-series roof racks come with the option to add our ladder rack rollers. These rollers have been tailor-designed to suit the X-series racks. They make sliding your ladder onto the roof of your canopy a breeze and they also protect the roof racks.
STANDARD ROOF RACKS
The main benefit of our standard roof racks is the ability to maximize the storage space of your canopy. Our standard roof racks overhang the cab by 600mm.
X-SERIES ROOF RACKS
Our X-series roof racks are our premium roof rack option and are exclusive to MRT. Along with maximizing your storage space of your canopy, our X-series racks have the added benefit of improving the overall appearance of your setup. The X-series roof racks have an anodised aluminium finish and we are able to adjust the height of our X-series ladder racks in 20mm increments. The roof racks also come with the option to sit flush with your canopy or have a 500mm overhang.
LADDER RACK ROLLERS
FOR X-SERIES ROOF RACKS
Our X-series roof racks come with the option to add our ladder rack rollers. These rollers have been tailor-designed to suit the X-series racks. They make sliding your ladder onto the roof of your canopy a breeze and they also protect the roof racks.
option to sit flush or have 500mm OVERHANG
LIFT-OFF SYSTEM
Our lift-off system is a great option for those that want to switch between using their canopy and their tray. It gives you the option to lift the canopy off and use your tray as needed. We build our lift-off canopy with a full sub-floor, we have four jack points and the package also includes the four legs required to move the canopy. The sub floor is fully reinforced which allows you to leave all of your gear inside the canopy and simply wind the legs to remove it from your vehicle.
LIFT-OFF CLAMPS
We have the option to add our quick release lift-off clamps as an extra to your lift-off system. These easy-unlock clamps give you the ability to quickly remove your canopy from your tray. We have these in two styles: our standard range and our lockable lift-off clamps.
INTERNAL SUPPORTS
With our internal supports options we swap out our standard C-section bracing that sits underneath the roof for a more heavy duty 40x40 RHS frame. We recommend this option if you intend on using the canopy to support any large or heavy items on the roof.
FITTING OPTIONS
At MRT we offer two forms of fitting options. We have a DIY kit that has been designed specifically for securing your canopy to your tray. With this kit we do suggest that you follow our instructions very closely and note that we cannot be responsible for the results carried out by fitting the canopy yourself. We also offer the option to have our experienced team of professionals to fit your canopy and any other MRT products you require fitted to your vehicle. Fitting fees vary depending on specific requirements and products.
POWDER COAT OPTIONS
DIMENSIONS
MRT Aluminium Ute Canopies are made to suit these leading brands and more!
