MRT21

$949.00

Features

  • Weather Resistant Rubber Seals
  • Fully Seam Welded
  • Strong Key Lockable T-Locks
  • Full Length Piano Type Hinge

Specifications

  • 1450mm x 500mm x 700mm
  • Heavy Duty 2mm Aluminium Checkerplate
  • 5 x Drawers 2 x Shelves
Type postcode to get estimated shipping cost:
Estimated Shipping Cost:

Fitting Kit *

Our Fitting kits are the perfect option for fitting your brand new toolbox to your ute. All kits include: 4 x Mounting Washers, 4 x Hex Recessed Bolts, 4 x 10mm Washers, 4 x 10mm Nylock Nuts.

We offer fitting services for all of our trays at our Yatala premises: 1 Computer Road, Yatala, QLD, 4220. We also offer the option of purchasing one of our kits which includes All mounting rails and bolts needed to fit the tray to your vehicle.

 

We have a large range of underbody toolboxes to suit every persons need, including our S range specifically designed for 4×4.

Our tail light protectors are the perfect option for keeping your taillights safe from damage.

Aluminium mesh protector – Fits to the front of tray above headboard and protects your vehicles Rear window from being damaged by accidental loading or movement of goods

Made from 76mm Aluminium tube, this rear rack mounts at the rear of the tray in recessed sockets making it removable when not needed.

Made from 22mm aluminium solid tube – these pegs install into the front and rear tubes to help tie off ladders etc

Galvanised steel body with dual aluminium lid, and aluminium faceplate. This drawer installs underneath your tray for extra storage.

The requested content cannot be loaded. Please try again later.

We have either a fixed or sliding window option for our driver side windows.

We have a range of different options available for front and back windows including: fixed and sliding options.

All of our canopies are built standard to 860mm high and we offer the option to upgrade to 1000mm.

Internal frame made with 40mm x 40mm x 2.5mm aluminium box section. We recommend this option if weight carried on the roof is a little more than just ladders, also ideal for those who like to camp in roof top tents as can safely support 300kg on roof when vehicle is stationary.

The canopy clamps are a quick release clamping system that are used to
secure the canopy to your tray without having to bolt through your tray.

Ladder racks are available on all our canopies, if carrying more than just ladders we recommend the internal support option to give a little more carrying capacity on the roof.

We are able to offer a flat Alloy finish on the canopies, this option is best if the canopy is to be powder coated or vinyl wrapped, please not that this finish does show every scratch, imperfection etc.

We have either a fixed or sliding window option for our passenger side windows.

The requested content cannot be loaded. Please try again later.

Our Fitting kits are the perfect option for fitting your brand new toolbox to your ute. All kits include: 2 x plates, 4 x Hex Recessed Bolts, 4 x 10mm Washers, 4 x 10mm Nylock Nuts.

Our Fitting kits are the perfect option for fitting your brand new toolbox to your ute. All kits include: 6 x Plates, 6 x Hex Recessed Bolts, 6 x 10mm Washers, 6 x 10mm Nylock Nuts.

Our keyless entry system includes:
• Control system (with 2 x remotes, 5m Power supply cable, in line fuse)
• 6 x T-Locks
*Does not include connection of power supply to vehicle
See full product here

Our keyless entry system includes: • Control system (with 2 x remotes, 5m Power supply cable, in line fuse) • 2 x T-Locks • Not compatible with 4×4 underbody toolboxes and drawers *Does not include connection of power supply to vehicle See full product here

Keyless Entry System

Our Fitting kits are the perfect option for fitting your brand new toolbox to your ute. All kits include: 4 x Mounting Washers, 4 x Hex Recessed Bolts, 4 x 10mm Washers, 4 x 10mm Nylock Nuts.

We offer fitting services for all of our trays at our Yatala premises: 1 Computer Road, Yatala, QLD, 4220. We also offer the option of purchasing one of our kits which includes All mounting rails and bolts needed to fit the tray to your vehicle.

 

We have a large range of underbody toolboxes to suit every persons need, including our S range specifically designed for 4×4.

Our tail light protectors are the perfect option for keeping your taillights safe from damage.

Aluminium mesh protector – Fits to the front of tray above headboard and protects your vehicles Rear window from being damaged by accidental loading or movement of goods

Made from 76mm Aluminium tube, this rear rack mounts at the rear of the tray in recessed sockets making it removable when not needed.

Made from 22mm aluminium solid tube – these pegs install into the front and rear tubes to help tie off ladders etc

Galvanised steel body with dual aluminium lid, and aluminium faceplate. This drawer installs underneath your tray for extra storage.

The requested content cannot be loaded. Please try again later.

We have either a fixed or sliding window option for our driver side windows.

We have a range of different options available for front and back windows including: fixed and sliding options.

All of our canopies are built standard to 860mm high and we offer the option to upgrade to 1000mm.

Internal frame made with 40mm x 40mm x 2.5mm aluminium box section. We recommend this option if weight carried on the roof is a little more than just ladders, also ideal for those who like to camp in roof top tents as can safely support 300kg on roof when vehicle is stationary.

The canopy clamps are a quick release clamping system that are used to
secure the canopy to your tray without having to bolt through your tray.

Ladder racks are available on all our canopies, if carrying more than just ladders we recommend the internal support option to give a little more carrying capacity on the roof.

We are able to offer a flat Alloy finish on the canopies, this option is best if the canopy is to be powder coated or vinyl wrapped, please not that this finish does show every scratch, imperfection etc.

We have either a fixed or sliding window option for our passenger side windows.

The requested content cannot be loaded. Please try again later.

Our Fitting kits are the perfect option for fitting your brand new toolbox to your ute. All kits include: 2 x plates, 4 x Hex Recessed Bolts, 4 x 10mm Washers, 4 x 10mm Nylock Nuts.

Our Fitting kits are the perfect option for fitting your brand new toolbox to your ute. All kits include: 6 x Plates, 6 x Hex Recessed Bolts, 6 x 10mm Washers, 6 x 10mm Nylock Nuts.

Our keyless entry system includes:
• Control system (with 2 x remotes, 5m Power supply cable, in line fuse)
• 6 x T-Locks
*Does not include connection of power supply to vehicle
See full product here

Our keyless entry system includes: • Control system (with 2 x remotes, 5m Power supply cable, in line fuse) • 2 x T-Locks • Not compatible with 4×4 underbody toolboxes and drawers *Does not include connection of power supply to vehicle See full product here

Download Spec Sheet
MRT21_Product Plan_a
MRT21_Product Plan_b

Our Fitting kits are the perfect option for fitting your brand new toolbox to your ute. All kits include: 4 x Mounting Washers, 4 x Hex Recessed Bolts, 4 x 10mm Washers, 4 x 10mm Nylock Nuts.

We offer fitting services for all of our trays at our Yatala premises: 1 Computer Road, Yatala, QLD, 4220. We also offer the option of purchasing one of our kits which includes All mounting rails and bolts needed to fit the tray to your vehicle.

 

We have a large range of underbody toolboxes to suit every persons need, including our S range specifically designed for 4×4.

Our tail light protectors are the perfect option for keeping your taillights safe from damage.

Aluminium mesh protector – Fits to the front of tray above headboard and protects your vehicles Rear window from being damaged by accidental loading or movement of goods

Made from 76mm Aluminium tube, this rear rack mounts at the rear of the tray in recessed sockets making it removable when not needed.

Made from 22mm aluminium solid tube – these pegs install into the front and rear tubes to help tie off ladders etc

Galvanised steel body with dual aluminium lid, and aluminium faceplate. This drawer installs underneath your tray for extra storage.

The requested content cannot be loaded. Please try again later.

We have either a fixed or sliding window option for our driver side windows.

We have a range of different options available for front and back windows including: fixed and sliding options.

All of our canopies are built standard to 860mm high and we offer the option to upgrade to 1000mm.

Internal frame made with 40mm x 40mm x 2.5mm aluminium box section. We recommend this option if weight carried on the roof is a little more than just ladders, also ideal for those who like to camp in roof top tents as can safely support 300kg on roof when vehicle is stationary.

The canopy clamps are a quick release clamping system that are used to
secure the canopy to your tray without having to bolt through your tray.

Ladder racks are available on all our canopies, if carrying more than just ladders we recommend the internal support option to give a little more carrying capacity on the roof.

We are able to offer a flat Alloy finish on the canopies, this option is best if the canopy is to be powder coated or vinyl wrapped, please not that this finish does show every scratch, imperfection etc.

We have either a fixed or sliding window option for our passenger side windows.

The requested content cannot be loaded. Please try again later.

Our Fitting kits are the perfect option for fitting your brand new toolbox to your ute. All kits include: 2 x plates, 4 x Hex Recessed Bolts, 4 x 10mm Washers, 4 x 10mm Nylock Nuts.

Our Fitting kits are the perfect option for fitting your brand new toolbox to your ute. All kits include: 6 x Plates, 6 x Hex Recessed Bolts, 6 x 10mm Washers, 6 x 10mm Nylock Nuts.

Our keyless entry system includes:
• Control system (with 2 x remotes, 5m Power supply cable, in line fuse)
• 6 x T-Locks
*Does not include connection of power supply to vehicle
See full product here

Our keyless entry system includes: • Control system (with 2 x remotes, 5m Power supply cable, in line fuse) • 2 x T-Locks • Not compatible with 4×4 underbody toolboxes and drawers *Does not include connection of power supply to vehicle See full product here